The DAEX25X4-4 is a unique exciter assembly from Dayton Audio. It uses an array of 4 separate exciters along with a frame to actuate a larger area than conventional exciters. This results in higher power handling and more output.
• Quick, secure installation with pre-applied 3M™ VHB™ adhesive
• Proprietary voice coils and a rare-earth neodymium motor
• Four 24mm voice coils improves power handling to 40 watts RMS
• Easy 8 ohm load, can be powered by most amplifiers
The Dayton Audio exciter assembly’s unique design uses a plastic frame and 4 25mm exciters to actuate a larger area with more power than conventional designs. This array of exciters is wired in a series-parallel configuration for an overall impedance of 8 ohms and power handling of up to 40 watts RMS.
The DAEX25X4-4 exciter features the same ability to turn nearly any surface into a speaker, like other exciters and tactile transducers, but with a larger contact area and moving mass allowing for an increase in energy transfer. Perfect for use in drop ceilings, walls, or in cabinet doors.
To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied, just peel and stick. Connection is made with 10″ wire leads to keep installation and wiring as easy as possible.
Dimensions: 7.5″ W x 7.5″ H x 0.75″ D