Description

The Dayton Audio DAEX32Q-8 dual spring balanced exciter, when applied to vertical surfaces, has more linear movement to deliver incredibly accurate response while producing lower distortion.

Product Highlights

• 32 mm two layer voice coil for high, 20 watts RMS, power handling

• Quick, secure installation with pre-applied 3M™ VHB™ adhesive

• Easy connection to most amplifiers with 8 ohms impedance

• A dual steel spider design to better support the large neodymium motor

 

Product Description

With the DAEX32Q-8 from Dayton Audio, you can turn most rigid, flat surfaces into a speaker. Designed specifically for mounting to vertical surfaces. This exciter uses a dual spring spider to better support the large neodymium motor providing improved linearity. This exciter can handle up to 40 watts peak for high output even when attached to thicker surfaces, due to a 2-layer 32 mm voice coil. 3M VHB (Very High Bond) adhesive is pre-applied (just peel and stick) to ensure maximum acoustic energy transfer between the transducer and the surface. This exciter is perfect for turning whatever you can imagine into a speaker such as windows, monitors, cabinet doors, garage doors, ect…

Note: An exciter’s frequency response and sensitivity are completely dependent on the exciter’s designated surface. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Thinner, smaller materials will tend to be louder and create a mid/tweeter response.

Specifications: • Power handling: 20 watts RMS, 40 watts peak • VCdia: 32 mm • Nominal impedance: 8 ohms • Re: 6.5 ohms • Le: 0.36 mH • Fs (uncoupled): 324 Hz • Dimensions: 2.38″ (60.5 mm) dia. x 0.78″ (19.9 mm) H • Adhesive dimensions: 1.26″ (32 mm) outside diameter, 0.9″ (23 mm) inside diameter • Weight: 132.6 grams.